[Exclusive] Motorola Maui design, specifications revealed before launch


91mobiles has collected renders and key specifications of the phone from a reliable industrial source. Here’s your first look at the upcoming Motorola Maui and what it brings to the table.

Motorola Maui design

The Motorola Maui has a traditional candy bar form factor. Motorola Maui’s flat back has curved sides for better grip. It has a rectangular camera island that neatly houses the triple camera setup and LED flash. There’s also a Motorola logo, which presumably works as a fingerprint reader.

Coming to the front, you get a thin bezel display with a chunky bottom and a center-aligned punch-hole camera at the top. It has a volume rocker with power button on the right side. The render doesn’t show the underside of the Motorola Maui.

We’ll have to wait for the launch event to see if there’s a 3.5-mm headphone jack and a USB Type-C port for charging. Of course, the bottom houses the speaker grill and the microphone.

Motorola Maui Specifications

The Motorola Maui ships with a 1600×720 pixel HD+ display with a 20:9 aspect ratio. The heart of the device packs a Mediatek Helio G37 chip and 3GB of RAM. Taking care of photography needs on the Motorola Maui is a 5MP front-facing snapper and a triple rear camera setup: 16MP f/2.2 H1634B, 2MP f/2.4 OV02B10-A25H-001A, and 2MP f/2.4-GC24Y1.4Y.

Motorola Maui Specs

  • Mediatek Helio G37
  • 720p HD+ display
  • 3GB of RAM
  • 16MP-2MP-2MP triple rear
  • 5MP front camera

The full spec sheet of the Motorola Maui is still under wraps, but that shouldn’t stop it from being subject to leaks.


Source by 91 Mobiles

Written By Sabhitech

Leave a Comment