[ad_1]
The images show the Motorola X40 Pro aka Edge 40 Pro with a design familiar to its predecessor. Edge 30 Pro Except for the rear camera module. In the middle is the iconic Moto dimple.
The Moto X40 Pro design renders
The Motorola X40 Pro features a center-positioned punch-hole cutout for the selfie snapper and slightly curved edges. All corner bezels are very narrow so you can enjoy an immersive media consumption or gaming experience. The volume rocker and power button are on the right edge. The upper part houses the speaker grill, while the lower edge houses the USB Type-C port, speaker grill, primary microphone and SIM tray section.
Moving to the back, there is a square-shaped module that houses the triple cameras and LED flash. A Moto Dimple and Motorola branding can be seen on the back. The report says the phone will measure 161.3 x 73.9 x 8.6 mm (10.8 mm thick with the camera module). While the Motorola Edge 30 Pro comes with a plastic frame, the Motorola X40 Pro can get a metal chassis.
Since the fingerprint sensor cutout is not on the side or rear, it can be placed in the screen. The handset can be seen in black color but there may be other options at launch.
Motorola X40 Pro Specifications (Estimated)
The Motorola X40 Pro is expected to feature a 6.67-inch FHD+ OLED display with a 165Hz refresh rate, HDR10+ certification and a punch-hole cutout for the selfie snapper. The handset is likely to boot Android 13 OS out of the box and pack a 5000mAh battery with 68W fast charging support, while the global version may come with 125W fast charging.
As for the cameras, the Motorola X40 Pro has a 50MP primary camera, a 50MP ultra-wide angle lens and a new 12MP telephoto lens. The handset is expected to have a 60MP snapper on the front for selfies and video chats. The Edge 40 Pro may be powered by a Qualcomm Snapdragon 8 Gen2 SoC paired with 12GB of RAM and 256GB of storage, which may not be expandable.
The Motorola X40 Pro is expected to have an IP68 rating for water and dust resistance.